2018年发表的文章

2018年，课题组共发表文章28篇，其中SCI收录23篇，EI收录2篇，核心期刊收录3篇：

(1). B. Ren, J. Liu, W. Huo, K. Gan, Y. Lu, Y. Chen, L. Wang, J. Yang and Y. Huang. Facile fabrication of nanofibrous network reinforced hierarchical structured porous Si3N4-based ceramics based on Si-Si3N4 binary particle-stabilized foams, Ceram. Int., 2019, 45(2): 1984-1990. (SCI, IF=3.057)

(2). W. Huo, X. Zhang, K. Gan, Y. Chen, Y. Lu, J. Xu, J. Yang. Effect of zeta potential on properties of foamed suspension. Journal of the European Ceramic Society, 2019, 39(2-3):574-538. (SCI, IF=3.794)

(3). W. Huo, X. Zhang, Y. Chen, Z. Hu, D. Wang, J. Yang, Ultralight and high-strength bulk alumina/zirconia composite ceramic foams through direct foaming method, Ceramic International, 2019, 45(1):1464-1467. (SCI, IF=3.057)

(4). Y. Z. Wang, Y. Chen, W. Liu, P. H Zhao, Y. Li, Y. G. Dong, H. Q. Wang, J. L. Yang, Urchin-like Ni1/3Co2/3(CO3)0.5OH•0.11H2O anchoring on polypyrrole nanotubes for supercapacitor electrodes, Electrochim. Acta, 2019, 295: 989-996. (SCI, IF=5.116)

(5). J. Liu, B. Ren, T. Zhu, S. Yan, X. Zhang, W. Huo, Y, Chen ,and J. Yang. Enhanced mechanical properties and decreased thermal conductivity of porous alumina ceramics by optimizing pore structure, Ceram. Int., 2018, 44(11): 13240-13246. (SCI, IF=3.057).

(6). J. Liu, W. Huo, B. Ren, K. Gan, Y. Lu, X. Zhang, X. Tang, and J. Yang. A novel approach to fabricate porous alumina ceramics with excellent properties via pore-forming agent combined with sol impregnation technique, Ceram. Int., 2018, 44(14): 16751-16757. (SCI, IF=3.057).

(7). J. Liu, W. Huo, X. Zhang, B. Ren, Y. Li, Z. Zhang, and J. Yang. Optimal design on the high-temperature mechanical properties of porous alumina ceramics based on fractal dimension analysis, J. And. Ceram., 2018, 7(2): 89-98. (SCI, IF=1.605).

(8). Y. Lu, K. Gan, W. Huo, L. Lv, J. Liu, X. Zhang, S. Yan, and J. Yang, Dispersion and gelation behavior of alumina suspensions with Isobam, Ceramics International, 2018, 44(10): 11357–11363. (SCI, IF=3.057).

(9). X. Zhang, W. Huo, S. Yan, Y. Chen, K. Gan, J. Liu, J. Yang. Innovative application of PVA hydrogel for the forming of porous Si3N4 ceramics via freeze-thaw technique. Ceram. Int., 2018, 44(11): 13409-13413. (SCI, IF=3.057)

(10). X. Zhang, W. Huo, Y. Lu, K. Gan, S. Yan, J. Liu, J. Yang. Porous Si3N4-based ceramics with uniform pore structure originated from single-shell hollow microspheres. J. Mater. Sci., 2018, 54: 4484-4494. (SCI, IF=2.993)

(11). S. Yan, W. Huo, J. Yang, et al. Green synthesis and influence of calcined temperature on the formation of novel porous diatomite microspheres for efficient adsorption of dyes. Powder Technology, 2018, 329: 260-269. (SCI, IF=3.230).

(12). S. Yan, P. He,J. Yang, et al. Synthesis of novel low‐cost porous gangue microsphere/geopolymer composites and their adsorption properties for dyes[J]. International Journal of Applied Ceramic Technology, 2018, 15(6): 1602-1614. (SCI, IF=1.165).

(13). 张在娟，唐欣悦，闫姝，吕琳，杨金龙.聚氨酯原料对聚氨酯发泡法所得Al2O3多孔陶瓷性能的影响，功能材料，2018,09: 9067-9071. (核心)

(14). W. Huo, Y. Chen, Z. Zhang, J. Liu, S. Yan, J. Wu, X. Zhang, J. Yang. Highly porous barium strontium titanate (BST) ceramic foams with low dielectric constant from particle-stabilized foams. J. Am. Ceram. Soc., 2018, 101(4): 1737-1746. (SCI, IF=2.956)

(15). 张笑妍, 霍文龙, 兰天, 崔杰, 干科, 闫姝, 杨金龙. 利用SiO2聚空心微球调控多孔Si2N2O陶瓷微观形貌. 稀有金属材料与工程, 2018, 47(S1): 41-44. (SCI, IF=0.29)

(16). W. Huo, X. Zhang, Y. Chen, Y. Lu, J. Liu, S. Yan, Jia-Min Wu, Jinlong Yang. Novel mullite ceramic foams with high porosity and strength using only fly ash hollow spheres as raw material. J. Eur. Ceram. Soc., 2018, 38(4): 2035-2042. (SCI, IF=3.794)

(17). W. Huo, X. Zhang, K. Gan, D. Wang, Y. Chen, J. Yang. Mechanical strength of highly porous ceramic foams with thin and lamellate cell wall from particle-stabilized foams. Ceram. Int., 2018, 44(5): 5780-5784. (SCI, IF=3.057)

(18). S. Yan, Y. Pan, L. Wang, J. Liu, Z. Zhang, W. Huo, J. Yang, Y. Huang. Synthesis of low-cost porous ceramic microspheres from waste gangue for dyes adsorption, J. Adv. Ceram., 2018, 7(1): 30-40. (SCI, IF=1.605).

(19). J. Liu, Y. Li, S. Yan, Z. Zhang, W. Huo, X. Zhang, J. Yang. Optimal design on the mechanical and thermal properties of porous alumina ceramics based on fractal dimension analysis, Int. J. Appl. Ceram. Tec., 2018, 15(3): 643-652. (SCI, IF=1.165).

(20). 闫姝, 潘一鸣, 王庆刚, 王璐, 霍文龙, 刘静静, 张在娟, 杨金龙. 凹凸棒微珠对废水中孔雀石绿的吸附性能研究. 功能材料, 2018, 49(03): 3092-3096+3102. (会议论文，核心)

(21). S. Yan, Y. Pan, L. Wang, X. Zhang, J. Liu, J. Yang. Effects of calcination temperature on the microstructure and adsorption properties of attapulgite microspheres. Materials Science Forum., 2018, 913: 907-16. (会议论文，EI).

(22). 唐欣悦, 张在娟, 霍文龙, 张笑妍, 刘静静, 闫姝, 王修慧, 杨金龙. 硬脂酸表面改性对聚氨酯发泡法制备ZrO2多孔陶瓷性能的影响[J]. 硅酸盐学报, 2018, 46(06): 772-779.（EI）

(23). 潘一鸣, 闫姝, 唐欣悦, 王庆刚, 王修慧, 杨金龙. 煤矸石微珠的制备及其对甲基紫和孔雀石绿的吸附性能[J]. 功能材料, 2018, 49(06): 6001-6008.（核心）

(24). X. Tang, Z. Zhang, X. Zhang, et al. Design and formulation of polyurethane foam used for porous alumina ceramics[J]. Journal of Polymer Research, 2018, 25(6):136. (SCI, IF=1.434)

(25). Q. Chang, S.S. Yang, L.Q. Li, C.R. Xue, Y. Li, Y.Z. Wang, S.L. Hu, J.L. Yang, F. Zhang. Loading sulfur and nitrogen co-doped carbon dots onto g-C3N4 nanosheets for an efficient photocatalytic reduction of 4-nitrophenol. Dalton Transactions, 2018, 47: 6435-6443. (SCI, IF=4.099)

(26). W. Liu, L. Lv, Y.Z. Wang, C.R. Xue, Y.G. Dong, J.H. Wang, J.Y. Yang. Structural phase transition and electrical properties of Sr2+ substituted porous PMN‐PZT ceramics. J. Ame. Ceram. Soc., 2018, 101(6): 2197-2201. (SCI, IF=2.956)

(27). D. Wang, Y. Z. Wang, Y. Chen, et al, Coal tar pitch derived N-doped porous carbon nanosheets by the in-situ formed g-C3N4 as a template for supercapacitor electrodes, Electrochimica acta, 2018, 283: 132-140 (SCI, IF=5.116)

(28). D. Wang, Y. Chen, H. Wang, P. Zhao, W. Liu, Y. Z. Wang, et al, N-doped porous carbon anchoring on carbon nanotubes derived from ZIF-8/polypyrrole nanotubes for superior supercapacitor electrodes, Applied Surface Science, 2018, 457: 1018-1024 (SCI, IF=4.439)